Intercom; Scrambler; Call Alert - Albrecht Tectalk Action Pro Mode D'emploi

9) Intercom

This radio has intercom capability that allows you and your partner to
communicate with each other using the intercom connector, which is optionally
available.
To change the intercom setting, press the MODE button until
the UP or DOWN button to change the setting. Press the PTT or MODE button or
wait for 5 seconds to store your choice. The intercom icon will appear when
intercom is active.
Please contact us to get the optional intercom accessories.

10) Scrambler

The scrambler distorts your voice prior to transmission. This makes it difficult for
other users who do not have the same scrambler decoders to understand your
communication. Therefore the unit of your communication partner has to activate
the scrambler mode in order to hear a clear voice. But as long as the scrambler
mode is active you won´t be able to understand anyone without scrambler either.
To change the scrambler setting, press the MODE button until
Use the UP or DOWN button to change the setting. Press the PTT or MODE
button or wait for 5 seconds to store your choice. The scrambler icon will appear
when the scrambler is active.

11) Call Alert

To alert other users to your message and gain their attention you can send a call
alert melody by pressing the CALL button. There are three different call alert
tones.
To change the call alert melody, press the MODE button until
the UP or DOWN button to change the setting. Press the PTT or MODE button or
wait for 5 seconds to store your choice.
appears. Use
appears.
appears. Use
16