Lamp/Monitor Button; Call Button; Compander/ Scan Button - Albrecht Tectalk Action Pro Mode D'emploi

6) Lamp/Monitor BUTTON

Press this button briefly to switch the flash light lamp on or off.
This flash light lamp is working only while the radio is turned on.
Press and hold this button for about 2 seconds to activate the
monitor function. Releasing the button will deactivate the monitor
function.

7) Call Button

Press this button to transmit a call melody and alert other parties
to your call.

8) Compander/ Scan Button

Press this button briefly to activate or deactivate the compander
function.
Press and hold this button for 2 seconds to activate or deactivate
the scanning process.
9