Roger Beep - Albrecht Tectalk Duro XS Mode D'emploi

button to change the setting. Press the PTT button or wait for 5
seconds to store your choice.
There are 5 squelch levels. Level 1 is the most sensitive (open)
and level 5 is the least sensitive (closed). Auto is the optimum
factory setting and ‚Off' is fully open, with constant static noise.

1.1. Roger Beep

deactivate the Roger Beep as required.
To change the Roger Beep setting, press the MODE button
until the Roger Beep icon and current setting displays. Use the
UP or DOWN button to change the setting. Press the PTT or
FUNCTION button or wait for 5 seconds to store your choice.
The Roger Beep icon will appear when Roger Beep is active.
1.1. Key Tone
change the Key Beep setting, press the MODE button until the
Key Beep icon appears. Use the UP or DOWN button to change
the setting. Press the PTT or FUNCTION button or wait for 5
seconds to store your choice.
The Key Beep icon will appear when Key Beep is active.
The Roger Beep is a short tone that is
automatically added to the end of your
transmissions to tell other users that you
have fi nished speaking. You can activate or
If the Key Beep is activated, your radio
will emit a confi rmation tone whenever
you use the keypad. You can activate or
deactivate the key Beep as required. To
English 39