Introduction; General; Ordering Parts; Unpacking - Vulcan 2GR45MF Manuel D'installation Et De Fonctionnement

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GRMF SERIES GAS FRYERS
Vulcan Fryers are produced with quality workmanship and material. Proper installation,
usage and maintenance will result in years of satisfactory performance.
Before installing the fryer, thoroughly read this manual and carefully follow all instructions.
This manual is applicable to model listed on the cover page. Procedures in this manual
will apply to all models unless specified. Pictures and illustrations can be of any model
unless the picture or illustration needs to be model specific.
Customers may order parts directly from their local authorized service center. If not
known, call Vulcan Customer Service at 800-814-2028.
To speed up your order, provide the model number, serial number, gas type, part needed,
item part number (if known) and quantity needed.
MODEL -
GMO
2GR45MF
3GR45MF
4GR45MF
2GR65MF
3GR65MF
2GR85MF
3GR85MF
This fryer was carefully inspected before leaving the factory. The carrier assumes full
responsibility for the safe delivery upon acceptance of the shipment. Check for possible
shipping damage immediately after receipt.
If the fryer is found to be damaged, complete the following steps:
1.
Carrier must be notified within 5 business days of receipt.
2.
Carrier's local terminal must be notified immediately upon discovery (note time,
date, and who was spoken to), and follow up and confirm with written or electronic
communication.
3.
All original packing materials must be kept for inspection purposes.
4.
The fryer cannot have been moved, installed, or modified.
5.
Notify Vulcan Customer Service immediately at 800-814-2028.
VULCAN-HART

ORDERING PARTS

FRYER CAPACITY
# of Heat Tubes
BTU / Hour
Each Fry Tank
Each Fry Tank
4
4
4
5
5
5
5

INTRODUCTION

GENERAL

Width Inch (cm)
Total System
120,000
31.0" (79)
120,000
46.5" (118)
120,000
62.0" (158)
150,000
42.0" (107)
150,000
63.0" (160)
150,000
42.0" (107)
150,000
63.0" (160)

UNPACKING

-4-
Shortening lbs. (kg)
Each Fry Tank
45-50 (21-23)
45-50 (21-23)
45-50 (21-23)
65-70 (29-32)
65-70 (29-32)
85-90 (39-41)
85-90 (39-41)
F-31233 Rev. T (12-15)

Publicité

Chapitres

Table des Matières
loading

Table des Matières