Cleaning; Daily - Vulcan 2GR45MF Manuel D'installation Et De Fonctionnement

GRMF SERIES GAS FRYERS
4. Slowly open the drain valve to allow oil to flow from the fry tank to the filter pan. Then open
the drain valve all the way.
5. When fry tank is empty use the tank brush to remove any additional debris.
6. Close the drain valve.
7. Fill tank with new shortening. Fill to a minimum of the MIN level but no higher than halfway
between MIN and MAX. Oil will expand as it is heated.
8. After the fry tank is filled with new oil, turn the thermostat knob to the desired set
temperature. The burners will come on and will heat the oil.

Daily

Clean your fryer regularly with the tank brush along with a damp cloth, and polish with a
soft dry cloth. If regular cleaning is neglected, grease will be burned on and discolorations
may form.
VULCAN-HART
Hot oil and hot parts can cause burns. Use care when operating,
cleaning, and servicing the fryer.

CLEANING

-14-
F-31233 Rev. T (12-15)