Small repairs - Do it yourself!
You only get a weak flow of water or no water at all !
The pressure gauge shows a 10% higher pressure than the
working pressure.
The injector may be
dirty
and you
should
first
remove
the
hose.
then straighten
a paper clip,
Cleaning the injector through
from both sides and replace
the return valve.
Reconnect the
hose,
Ersatzteile auf www.gluesing.net
and release the
injector with an
open-ended
spanner.
Now turn on the water
and you should get a
powerful stream of water,
but if you
only get a weak
flow of water
Check that
it
is clean.
and you are
ready to
continue
your work.
Remove the injector
together with the
spring and return
valve.
15