Small Repairs - Do It Yourself - Kränzle K 1152 TS T Instructions De Service

Small repairs -
No water from the nozzle but the gauge shows full pressure:
Most likely the nozzle is blocked.
CAUTION! Pull plug from socket prior to starting
any repair work!
50
do it yourself!
The pressure gauge shows full pressure, but
emerges from the nozzle only little water or
no water at all.
(Inside the pressure gauge there is no water
but a filling with glycol to damp the vibration
of the pointer.)
Proceeding:
Switch off the cleaner. Pull plug from the
socket. Operate trigger gun with safety catch
seveal times to decrease the pressure.
Unscrew trigger gun and lance first, then
rinse high-pressure gun to remove possible
soiling.
Check water inlet filter for soiling.
If the problem still exists, take wire (paper
clip) and push through nozzle opening.
If this procedure is not successful, the nozzle
has to be dismantled and cleaned or even
replaced, if necessary.