Environmental Protection - Evolution S185 Notice Originale

www.evolutionpowertools.com
Note: The operator should employ all
necessary PPE when using compressed dry air
as a cleaning medium.
GLASS SIGHT SHIELD
Clean the sight shield as required using a
damp cloth or a proprietary glass cleaning
medium. Do not use any abrasive materials as
these may damage or scratch the glass.
DEBRIS BUILD-UP (UPPER BLADE
GUARD)
During a blade change the opportunity to
check for any debris build up within the upper
blade guard should be taken. Any such debris
found should be removed using a suitable tool
(possibly plastic or wooden) which will remove
the debris without damaging the interior of
the blade guard.
WARNING: Suitable PPE should be worn by the
operator when carrying out this task.
Any removed debris must be disposed of in a
safe and environmentally responsible way.

ENVIRONMENTAL PROTECTION

(21)
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
18