D.articulating Legrest (Optional); Elevating Legrest (Optional) - Sunrise Medical Quickie Iris Manuel D'utilisation Et Garantie

22
3. Height Adjustment
a. Loosen and remove the retaining bolt (G) in the footrest mounting bracket.
b. Slide the lower tube upward or downward to the desired position until predrilled
holes on hanger tubes are aligned.
c. Reinsert bolt and tighten.
4. Footrest Angle Adjustment
a. Loosen the retaining bolt (H) in the adjustment locking joint.
b. Position footrest foreword or rearward in desired angle.
c. Retighten the bolt.
5. Footplate Angle Adjustment
a. Loosen the retaining bolt (I) in the footplate locking joint.
b. Position footplate upward or downward in desired angle.
c. Retighten the bolt.
D. ARTICULATING LEGREST (OPTIONAL)
1. Installation or Removal
To install or remove Articulating Legrest (ALR) see instructions for Swing-away Footrest
installation.
2. Elevation Adjustment
a. To raise legrest, lift to desired position. Legrest will automatically lock in place.
b. To lower legrest, while seated in chair, press release lever (A) down and lower Legrest
to desired position. Legrest will automatically lock in place.
3. Height Adjustment of the Calf Pad
a. Rotate the tube clamp (B) towards the outside.
b. Slide it up or down.
c. Rotate it back in the desired indented position.
4. Height Adjustment with Extension Tube
a. Remove the bolt (C) in the hanger frame tube.
b. Reposition footrest height.
c. Align the tube clamp with the selected bolt.
d. Re-tighten the bolt (C).
E. ELEVATING LEGREST (OPTIONAL)
1. Installation or Removal
To install or remove Elevating Legrest (ELR) see instructions for Swing-away Footrest instal-
lation.
2. Elevation Adjustment
a. To raise legrest, lift to desired position. Legrest will automatically lock in place.
b. To lower legrest, while seated in chair, press release lever (D) down and lower legrest
to desired position. Legrest will automatically lock in place.
3. Height Adjustment of the Calf Pad.
a. Loosen the retaining nut (E) located at the back of the calf pad bracket assembly.
b. Slide the calf pad bracket assembly up or down.
c. Tighten it in the desired position.
4. Height Adjustment with Extension Tube
a. Loosen both bolts (F) in the hanger frame tube.
b. Reposition footrest height.
c. Re-tighten all bolts (F).
931135 Rev. A
E n g l i s h
I X . S e t - U p & A d j u s t m e n t
H
G
I
A
B
C
E
F
D