Zehnder ComfoControl Luxe Manuel page 49

13. If necessary, press "
menus.
14. Repeat steps 7 to 13 to enter multiple parameters.
The minimum and maximum values for the avail-
able settings parameters are preset in the soft-
ware.
Returning to the main menu
The procedure is as follows:
15. Press " " to return to the "
16. Press " " again to return to the main screen.
" again to return to the P
".
INSTALLATION MENU
After fi ve minutes, the ComfoControl will return
automatically to the main screen.
Once parameters have been set in the P menus,
the ComfoControl returns almost immediately to
the main screen. However, this will take longer
after a system reset (see Menu P7), as the sys-
tem then has to reboot.
13