5. Press "
" or "
(weeks) delay required.
6. Press " " to confi rm the settings and return to the
main screen.
The minimum and maximum time delay for the
(ventilation) settings are preset in the software.
After 30 seconds, the ComfoControl will return to
the main menu automatically. Your settings have
now been saved.
2.2.9 Temperature correction settings
If the ComfoControl is used in conjunction with a heating
system thermostat, we recommended synchronizing the
temperature for both units on the display.
Use the ComfoControl to:
•
Programme a temperature correction relative to the re-
corded temperature.
The procedure is as follows:
1. Press "
8
" to set the number of minutes
".
2. Press "
3. Press "
" and then "
4. Press "
" or "
5. Press " " to confi rm the settings and return to the
main screen.
After 30 seconds, the ComfoControl will return to
the main menu automatically.
2.2.10 Screen settings
Use the ComfoControl to:
•
Set the clarity and contrast of the touch screen.
The procedure is as follows:
1. Press "
".
2. Press "
".
".
" to correct the ˚C setting.
".