Comfocontrol; Using Comfocontrol; Time And Date Settings - Zehnder ComfoControl Luxe Manuel

2.1

ComfoControl

The ComfoControl regulates your ventilation and/or cooling system.
• The ComfoControl is mounted to the living room wall and communicates with your ventilation and/or cooling system.
The list below briefl y explains what information the unit displays.
The ComfoControl display is a touch screen. All settings can be accessed, adjusted and confi rmed simply by touching the screen.
If the function is not
surrounded by a
then it is not active
Current outside temperature
Actual temperature
(programmable using
MAN function)
Actual ventilation setting
(programmable
using MAN function)
Automatic or manual
ventilation activated
2.2

Using ComfoControl

The ComfoControl is used for the following:
- Setting time and date.
- Setting the comfort temperature.
- Setting the ventilation volume.
- Switching the extractor hood on/off.
- Switching the supply and exhaust fan on/off.
If your ventilation system has a chimney cleaning
function, you will be unable to switch the supply
and exhaust fan on and off.
- Setting a personal ventilation programme.
- Setting a personal temperature programme.
- Setting a time delay for a number of ventilation set-
tings.
- Setting a temperature correction.
- Setting the screen.
- Setting the language.
A concise explanation of the above listing is given in the para-
graphs below.

2.2.1 Time and date settings

Use the ComfoControl to:
• Set the date and time.
2
,
OPEN or CLOSE air supply
extractor hood activated
System status
and error messages
Heat Recovery
system active
Cooling system,
OPEN or CLOSE
reheater and/or
air exhaust
Heat Recovery
system activated
or bypass CLOSED [=
The procedure is as follows:
1. Press "DAY AND TIME", here "
2. Press "
3. Pressleft "
4. Pressright "
5. Press "
main screen.
After 30 seconds, the ComfoControl will return to
the main menu automatically. Your settings have
now been saved.
If the function is not
surrounded by a
then it is not active
Time and date
Switch extractor hood
ON or OFF
Go to SETTINGS screen
(for ventilation and
temperature settings)
Switch automatic
or manual ventilation
ON or OFF of
Go to SYSTEM STATUS
screen (for system data and
error messages)
Bypass
[= ]
OPEN
]
" or " " to set the day.
" or " " to set the hour.
" or " " to set the minutes.
" to confi rm the settings and return to the
,
".