Zehnder ComfoControl Luxe Manuel page 48

3. Press " "; and then "
4. Press code "3520" to go to the "INSTALLATION
MENU".
5. Press " " or "
– The "
INSTALL VENTILATION
– The "
INSTALL ARTIC
6. Press "OK" to enter the selected menu.
The P menus are now accessible
If the Artic cooling system is not connected, the
"OK" will not appear on the screen, and the re-
lated P menus will not be available.
7. Using " " or "
e.g. "P5 OPTIONS".
12
".
" to go to:
" menu, or ...
" menu.
", select the required P menu,
8. Press "OK" to confi rm the P menu selected.
9. Using " " or " " , select the required P sub-
menu, e.g. "P51 PRE HEATER".
10. Press "OK" to confi rm the P submenu selected.
Entering settings in P menus
The procedure is as follows:
11. Using " " or " ", select a value for the param-
eter.
12. Press " " to confi rm the parameter's new value.