Switching Extractor Hood On/Off; Switching Supply And Exhaust Fan On/Off - Zehnder ComfoControl Luxe Manuel

The ComfoControl will display "
ard during manual ventilation, and not "
If you wish to reactivate the automatic ventilation setting,
then:
• Press "AUTO" to return to the automatic ventilation
setting.

2.2.4 Switching extractor hood on/off

The procedure is as follows:
1. Press " " to activate the extractor hood.
2. Press " " or " " to set the ventilation volume for the
extractor hood.
3. Press " " to confi rm the settings and return to the
main screen.
The extractor hood symbol ("
on the ComfoControl display.
4. Press "
hood.
Note!
If the extractor hood is fi tted with a time-delay switch (see
§ 2.2.8 for more information about time delay), then it will
not switch off immediately, but will continue to run for the
programmed time period.
The extractor hood symbol ("
the ComfoControl display once the programmed
time delay has run its course.
Note!
If the extractor hood is fi tted with a time-delay switch (see
§ 2.2.8 for more information about time delay), then the
time delay symbol (" ") will appear on the ComfoCon-
trol display in place of the ventilation volume buttons. The
extractor hood will be switched off after the programmed
number of minutes.
There is no
(" ") displayed on the ComfoControl is when the
extractor hood is activated. Instead, the extractor hood
ventilation setting is displayed in the extractor hood sym-
bol. These are:
4
- Use for cooking, showering and if
extra ventilation is required.
" as stand-
") then appears
" again to deactivate the extractor
") disappears from
ventilation volume
• " " for extractor hood ventilation setting 1.
• " " for extractor hood ventilation setting 2.
".
• " " for extractor hood ventilation setting 3.
If the extractor hood is running, the programmed
ventilation setting is displayed in the extractor
hood symbol (e.g. " ").
2.2.5 Switching the supply and exhaust fan on/off
The procedure is as follows:
1. Press "
2. Press "
Once the supply and exhaust fans have been de-
activated, "
to indicate they are switched off.
3. Press "
supply fan.
4. Press "
the exhaust fan.
Once the supply and exhaust fans have been
activated, both " " and " " are displayed on
the ComfoControl to indicate they have been
switched on again.
setting
« to switch off the supply fan.
« to switch off the exhaust fan.
" is displayed on the ComfoControl
" by the supply fan symbol to reactivate the
" by the exhaust fan symbol to reactivate