Roborock S5 Max Mode D'emploi page 20

Installation
Using the robot
Attach the mop cloth bracket
5
Slide the mop cloth bracket under the water tank
following the alignment marks, until you hear a click.
Note:
Cleaning the mop cloth after 60-minutes of mopping is recommended
to ensure water flow and cleaning quality.
7. Adjust water flow rate
Use the mobile app to adjust the water flow as required.
Low
WaterLevel
8. Start cleaning
When the battery is fully charged, the power indicator will
remain lit. Press the
Medium High
Water Level Water Level
button or use the app to start cleanup.
9. Remove the mop cloth bracket
To remove the mop cloth bracket, press the two clips
inwards and pull the bracket backwards.
Note:
• When the charging dock is placed on a wooden floor, always use it with
the moisture-proof mat to prevent moisture damage.
• Removing and washing the mop cloth bracket, and emptying the water
tank frequently is recommended to prevent odors or mildew.
• Remove the mop cloth bracket if not mopping.
10. Separating the water tank from the mop cloth bracket
As shown in the figure, press the two side clips inwards
and slide the mop cloth bracket backwards to separate it
from the water tank.
16