Roborock S6 MaxV Mode D'emploi page 27

Instructions for use
No-go Zones/Virtual Barriers/
No-Mop Zone
Use the app to set no-go zones/virtual barriers/No-Mop Zone. The robot
will not enter no-go zones and areas sealed off by virtual barriers while
cleaning. No-mop zones only activate when the Mop Cloth Bracket is
installed.
Note:
・
"Map saving mode" must be turned on in the app to use virtual no-go zones and barriers.
・
This function can be used only to set cleaning zones. Do not use it to prevent the robot from entering
hazardous areas.
・
Moving the robot or changing the home environment may cause the map to become inaccurate and
erase virtual barrier and no-go zone settings.
Virtual Barriers
No-go Zones No-Mop Zone
26
Refilling the water tank or cleaning
the mop cloth
To add water or clean the mop cloth, press any button to stop the robot
and remove the mopping module. After adding water or cleaning the mop
cloth, reinstall the mopping module and press the
More app functions
Real-time map
updates
Change cleaning
mode
View cleaning
View robot status
history
Change robot voice Volume adjustment
Note:
Functions and details of the Xiaomi Home app may vary slightly due to the continuous app development
and upgrades.
button to continue.
Carpet Boost
location
Part replacement
Map management
schedule
DND mode
Firmware update
Robot