Mounting The Bike Carrier - PROUSER SILVERBIKE Notice D'assemblage Et De Sécurité

MOUNTING THE BIKE CARRIER

The bike carrier comes unassembled. Remove all parts from packaging and
arrange them in a well-organized way. The instructions will clearly describe and
show the parts that you need for each step and how to assemble the bike carrier.
Step 1
Parts:
Assembly:
Mount the light holder rail with the lights to the base frame using the two socket
head screws (M6x15), washers and little nuts (M6). Please use the two upper
holes of the base frame (see picture).
With the cable ties (6 of them) supplied with the carrier, the light cable can be
fastened neatly at the bottom of the carrier. Make sure that the cables can not
tough the ground anymore.
End result:
32