Mounting The Bike Carrier - PROUSER JADE Notice D'assemblage Et De Sécurité

MOUNTING THE BIKE CARRIER

The bike carrier is already assembled in part. You only need to assemble the last
parts. Remove all parts from packaging and arrange them in a well-organized
way. The instructions will clearly describe and show the parts that you need for
assembly of the bike carrier
Parts:
Assembly:
Please note you have to firmly tighten both rotary
knobs so that the U-frame will come on its place
well.
End result:
Slide the U-frame on the U-frame holders of
the base frame. Secure this U-frame with the
carriage bolts (M8x60), washers (M8) and
plastic knobs (M8) supplied with the carrier.
The plastic knobs must be mounted on the
inside.
32