Preface And General Information; Application Range - Lenze EMF2174IB Instructions De Montage

0Fig. 0Tab. 0
These Instructions
ƒ describe the installation and application of the CAN addressing module;
ƒ are only valid in combination with the Operating Instructions of the corresponding
controller;
ƒ are only valid for the CAN addressing module with the type designation:
L
Type
Id.-No.
Prod.-No.
Ser.-No.
E82AF000P0B201XX
Type code
CAN addressing module type 2174
Hardware version
Software version
Description
The CAN addressing module EMF2174IB serves to parameterise address and baud rate of
controllers in a CAN network. The controller address (C0350) and the baud rate (C0351) are
set in the CAN addressing module by hardware coding. The CAN addressing module
transmits the controller address and the baud rate to the controller after initialisation. All
parameters are then permanently stored.

Application range

The CAN addressing module EMF2174IB can be used with the following controllers:
ƒ 8200 vector frequency inverter and
ƒ 9300 servo inverter including all technology variants
EDK2174DB DE/EN/FR 4.0

Preface and general information


33.2174IB
7
99371BC013

1x 11
l