Preliminary Works - Lenze EMF2174IB Instructions De Montage

Important notes
Two codings are possible:
ƒ by connections within a Sub−D plug (
ƒ by setting two DIP switches inside the CAN addressing module (
)
Note!
The Sub−D plug settings have a higher priority than the DIP switch settings.
ƒ
"EER" trip is released in the controller if
ƒ
– the Sub−D plug is removed during operation,
– an invalid controller address has been coded,
– an invalid baud rate has been coded.
EDK2174DB DE/EN/FR 4.0

Preliminary works

Important notes
^ 9
)
8
^ 10
)
l