Safety Instructions; General Safety And Application Notes For Lenze Power Supply Modules - Lenze ECSEE Serie Instructions De Montage

1

Safety instructions

1.1

General safety and application notes for Lenze power supply modules

(acc. to Low−Voltage Directive 2006/95/EC)
For your personal safety
Depending on their degree of protection, Lenze power supply modules and their
accessory components can be live, moving and rotating during operation.
Surfaces can be hot.
Non−authorised removal of the required cover, inappropriate use, incorrect
installation or operation, creates the risk of severe injury to persons or damage
to material assets.
For more information please see the documentation.
High amounts of energy are produced in the power supply module. Therefore it
is required to wear personal protective equipment (body protection, headgear,
eye protection, ear protection, hand guard) when working with the power
supply module.
All operations concerning transport, installation, and commissioning as well as
maintenance must be carried out by qualified, skilled personnel (IEC 364 and
CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or DIN VDE 0110 and
national regulations for the prevention of accidents must be observed).
According to this basic safety information, qualified, skilled personnel are
persons who are familiar with the assembly, installation, commissioning, and
operation of the product and who have the qualifications necessary for their
occupation.
Application as directed
Power supply modules are components which are designed for installation in
electrical systems or machinery. They are not to be used as domestic appliances,
but only for industrial purposes according to EN 61000−3−2.
When installing the power supply modules in machines, commissioning (i.e.
starting of operation as directed) is prohibited until it is proven that the machine
complies with the regulations of the EC Directive 98/37/EC (Machinery
Directive); EN 60204 must be observed.
Commissioning (i.e. starting of operation as directed) is only allowed when
there is compliance with the EMC Directive (89/336/EEC).
The power supply modules meet the requirements of the Low−Voltage Directive
73/23/EEC. The harmonised standard EN 61800−5−1 applies to the power
supply modules.
The technical data as well as the supply conditions can be obtained from the
nameplate and the documentation. They must be strictly observed.
EDKCSEE040 DE/EN/FR 3.0
Safety instructions
General safety and application notes
l
1
49