Stopping The Unit - Echo DSRM-2600 Manuel D'utilisation

Operation

Stopping the unit

 The cutting attachment continues to run for a short period after the unit is switched off.
8. Not to keep the speed, push + button.
 When power to the unit is turned on:
 After 90 seconds of inactivity, unit will power itself off.
 If the LED remains lit, operation is normal.
 If the LED flashes once per second, the battery needs to
be charged.
 If the LED flashes four times per second, there is a fault
within the product. Turn power off to unit. Remove bat-
tery. Clear debris from around line head. Install battery.
Turn power on to unit. If flashing continues, have your au-
thorized servicing dealer repair the product.
WARNING
1. Release trigger switch and trigger switch lockout, and allow
trimmer head to stop.
2. Push power button (A) to turn off power to unit.
 Power indicator LED (B) turns off when power to unit is
turned off.
 If the trimmer head does not stop when the trigger and trig-
ger lockout are released, push power button to turn off and
remove the battery to stop the power supply to product.
Have your authorized servicing dealer repair power button
before using product again.
16
IMPORTANT