Maintenance And Care; Servicing Guidelines; Angle Transmission - Echo DSRM-2600 Manuel D'utilisation

Maintenance and care

Observe the following precautions when checking and maintaining your product after use:
 Turn power to unit off, remove battery, and make sure all moving parts have come to a complete stop.
An accident could occur if the product starts unexpectedly.
 Allow unit to cool before performing service.
You could burn yourself.
 Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or
authorized service providers.
 Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.

Servicing guidelines

Area
Battery

Angle transmission

Cut off knife
Screws, bolts and nuts
* Or 50 hours, whichever occurs first.
Maintenance and care
If you have any questions or problems, please contact your dealer.
Cleaning battery and battery compartment
Angle transmission
IMPORTANT
Maintenance
Inspect/Clean/Charge
Grease
Inspect/Clean
Inspect, Tighten/Replace
A
Maintenance and care
WARNING
Page
10
22
-
-
 Risk of electric shock or fire. Do not use conducting ma-
terials to clean battery or battery compartment.
1. Release trigger switch and trigger switch lockout and allow
trimmer head to stop.
2. Make sure power indicator LED is not illuminated.
3. Depress battery pack latch release (A) slide battery pack out
of power head.
4. Use compressed air or a soft bristle brush to remove debris
from battery and battery compartment.
1. Remove the plug (A) and drain screw (B) from the angle
transmission (C).
2. Add grease into the transmission until old grease is pushed
out. If necessary, use a low pressure pump.
 Use good quality lithium multi grease.
3. Reinstall the drain screw and plug.
22
Before use
•
•
•
WARNING
NOTE
Monthly
•*