Pitney Bowes DM100i Guide D'installation Rapide page 3

For best results, we strongly encourage you to follow the steps in this
!
guide in sequential order.
Step 1. Remove Shipping Tape
Open the top cover of the meter and remove
any packing material, protective foam, or tape
that may be present. Close the cover.
Step 2. Select a Connection Method
You must connect to the Pitney Bowes Data Centre to add postage
funds, download software updates, and perform Canada Post required
inspections. Your meter can be connected to the Data Centre using PC
Meter Connect®, LAN adapter or analog phone line. Select one of these
options and proceed with the next steps.
Step 3a. Setup Connectivity using PC Meter Connect
Install the PC Meter Connect Desktop Application online at
http://www.pitneybowes.ca/support. This software provides the
quickest data transfers and is certified by ICSA labs.
DM100i - Download and install the latest PC Meter Connect Desktop
Application from http://www.pitneybowes.ca/support
After you have installed the PC Meter Connect Desktop application,
you must return to this Guide and complete the meter setup starting at
Step 5. The PC onscreen directions will direct you to do so.
DM125 - Download and install the latest PC Meter Connect Desktop
Application from http://www.pitneybowes.ca/support
After you have installed the PC Meter Connect Desktop application,
follow the PC onscreen instructions which guide you through the
complete system setup. You need not refer to this Guide again.
1