Pitney Bowes DM100i Guide D'installation Rapide page 22

Troubleshooting (continued)
To Change Selection after the Setup Program is Complete
Press the Options key.
•
• Press the green Page Down button twice.
Select Advanced Features.
•
• Press Page Down.
Select Run Install Mode.
•
Connectivity using Analog Phone Line- No dial tone
Check that you are using an analog line such as
• most fax machine lines;
• lines used by computer modem or credit card reader;
• residential phone lines.
Check that you have entered a dialing prefix if your phone system needs
a number to reach an outside line. If you are using a DSL line you may
require a DSL filter. Contact your telephone company or local network
administrator.
Connectivity using Analog Phone Line - Cannot Reach Data Centre
Check that you have entered a dialing prefix if your phone system needs
a number to reach an outside line.
Still have questions?
For installation support call: 1-800-672-6937. Alternately, your questions
may be answered in the Operator Guide or online. The Operator Guide
can be found at the following websites.
Product Name: DM100i Model: P7EC
Product Name: DM125 Model: PREC
http://www.pitneybowes.ca/support
20