Install Filter; Operation) - Berbel Ergoline 2 Manuel D'utilisation Et De Montage

Installation
3.5.6 Install filter (with recirculating and hybrid

operation)

There is a pipe connection (Ø 150 mm) on the fan housing as
an installation aid for the installation of the filter.
The filter is placed correctly when the bottom edge of the
filter is parallel to the top edge of the fan's housing and the
gap is approximately 5 mm wide.
CAUTION!
Danger of injuries due to sharp edges!
The side panels of the fan box have edges that can cause
cutting injuries to the hands, e.g. with rough handling of the
filter attachment.
Carefully fit the filter from above.
Avoid contact with the side panels.
Recirculated air mode
Place the recirculated air filter onto the guide on the fan
housing from above.
Ensure that the recirculated air filter is correctly installed.
6003396_a – 27.03.2017
Hybrid mode - exhaust air upwards
Place the hybrid filter onto the guide on the fan housing
from above.
Ensure that the hybrid filter is correctly installed.
Hybrid mode - exhaust air to the rear
Place the hybrid filter onto the guide on the fan housing
from above.
Ensure that the hybrid filter is correctly installed.
135