Important Safeguards; Preparation - Russell Hobbs Desire 18996-56 Mode D'emploi

Masquer les pouces Voir aussi pour Desire 18996-56:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved. Children must
not use or play with the appliance.Keep the appliance and cable out of
reach of children.
c To avoid injury, take care handling the blades, emptying the jug, and
cleaning.
h Don't add hot liquid (over 40°C), as it may be ejected due to sudden
steaming.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don't leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its service
agent, or someone similarly qualified, to avoid hazard.
Don't put the motor unit in liquid.
l
Switch off (0) before fitting the jug to the motor unit.
Don't use accessories or attachments other than those we supply.
Don't use the appliance for any purpose other than those described in these instructions.
Don't operate the appliance if it's damaged or malfunctions.
Don't run the motor continuously for more than 2 minutes, it may overheat. After 2 minutes
switch off for at least 2 minutes, to recover.
DIAGRAMS
1.
speed control
2.
motor unit
3.
collar
4.
blade unit
5.
seal
BEFORE USING FOR THE FIRST TIME
Turn to "CARE AND MAINTENANCE" and clean the appliance, to remove manufacturing dust, etc.

PREPARATION

In use, treat the jug, blade unit, and collar as a single unit.
1.
Sit the motor unit on a stable, level surface.
2.
Lower the jug on to the motor unit, then turn the jug clockwise, to lock it in place (Fig. A).
3.
Remove the lid.
4.
Put the ingredients into the jug. Don't fill past the 1500ml mark. If you do, the contents may
force the lid off when you start the motor.
5.
Replace the lid.
6.
Align the pips on the cap with the slots in the hole in the lid, fit the cap, and turn it
clockwise to lock it.
HOUSEHOLD USE ONLY
6.
jug
7.
lid
8.
cap
` dishwasher safe
3

Publicité

Table des Matières
loading

Table des Matières