Lenz Digital Plus LH101 Mode D'emploi page 19

Read / write service variables (SV) 19
Enter the number of the desired SV (in the
example SV2, baud rate of the interface).
E
Confirm the number entry with the 'Lok' key.
The current setting of the SV is displayed.
You can now delete the displayed value ...
... and enter a new one.
Complete the entry with the 'Loco' key.
With 'Esc' you can return to the input of
another CV ...
... or ...
... step by step ...
... return to locomotive control.