Device elements
1 Fleece filter bag
2 Suction support
3 Suction hose
4 Nameplate
5 Carrying handle
6 Power cord
7 Mains plug holder
8 Suction head
9 Suction head lock
10 Storage for accessories
11 Steering roller
12 Dirt receptacle
13 Pickup for floor nozzle
14 Main switch
15 Switch between hard surface/carpet
16 Floor nozzle
17 Suction tube
18 Suction force regulator (continuous)
19 Bender
20 Main filter basket
21 Motor protection filter
Colour coding
– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.
Check whether main filter basket has
been inserted into the appliance.
Operating modes
1 Operation with fleece filter bag or paper
filter bag (option)
2 Operation without filter bag
Installation of the filter bag
Release and remove the suction head.
Remove the main filter basket.
Install the fleece filter bag or the paper
filter bag (option).
Insert main filter basket.
Insert and lock the suction head.
10
Start up
Turning on the Appliance
Plug in the mains plug.
Switch on the appliance at the main
switch.
Cleaning operations
Set the selection switch of the floor noz-
zle to hard surface or carpet.
Regulate the suction force on the suc-
tion force regulator (continuous).
Perform the cleaning operation.
Turn off the appliance
Switch off the appliance at the main
switch.
Pull out the mains plug.
After each operation
Empty the container.
Vacuum and wipe the appliance inside
and outside with a damp cloth.
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
Care and maintenance
DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
– 2
EN
Operation
Transport
Storage