Proper Use; Safety Instructions; Device Elements; Start Up - Kärcher IVM 60/36-3 Manuel D'utilisation Original

ATTENTION
Pointer to a possibly dangerous situation,
which can lead to property damage.

Proper use

WARNING
The appliance is not suitable for vacuuming
dust which endangers health.
– The machine is meant for dry and wet
cleaning of floors and walls.
– This appliance is suited for commercial
and industrial use, e.g. in storage and
assembly areas and on production ma-
chines.
– The appliance is not approved for crane
loading.
– This appliance is not suitable for suck-
ing in hazardous dust particles.
– The device is suitable for vacuuming
moist or liquid substances.
– This appliance is suitable for vacuum-
ing dry, non-flammable dust particles
from machines.
– Any other use other than the specified
one will be treated as improper use of
the appliance.

Safety instructions

The enclosed safety information for wet/dry
vacuum cleaners must be read prior to ini-
tial commissioning!
WARNING
This appliance is not suitable for sucking in
hazardous dust particles.
This appliance should not be used or stored
in the open under wet conditions.
Safety instructions
Switch off the appliance after completing
the work and pull out the mains plug.
 Observe the safety regulations for the
materials being vacuumed.
In Emergency
In case of emergency (while sucking in
combustible materials, when there is a
short-circuit or some other electrical de-
fect), switch off the appliance and remove
the plug from the socket.
10

Device elements

1 Suction head
2 Nameplate
3 Floor nozzle holder
4 Filter vibrator
5 Washer ring
6 Filter
7 Suction support
8 Container handle
9 Dirt receptacle
10 Filter ring
11 Intermediate ring lock
12 Intermediate ring
13 Power cord
14 Cable hook
15 Carrying handle
16 Suction head lock
17 Push handle
18 Chassis
19 Steering roller
20 Cable clamp
21 Holder for suction pipe
22 Lever for the filter cleaning
23 Appliance switch suction turbine 3
24 Appliance switch suction turbine 1
25 Appliance switch suction turbine 2
 Bring the appliance to working position
- secure it, if required, with parking
brakes.
 Insert the suction hose into the suction
hose connection.
 Attach the desired accessoried to the
suction hose.
 Ensure that the vacuum material con-
tainer has been inserted properly.
ATTENTION
The highest allowed net impedance at the
electrical connection point (refer to techni-
cal data) is not to be exceeded. In case of
confusion regarding the power impedance
present on your connection, please contact
your utilities provider.
– 2
EN

Start up