Device Elements; Start Up; Operation; Transport - Kärcher T 8/1 Classic Mode D'emploi

Device elements

1 Paper filter bag
2 Suction support
3 Suction hose with manifold
4 Nameplate
5 Carrying handle
6 Cable hook
7 Power cord
8 Suction head
9 Suction head lock
10 Storage for accessories
11 Steering roller
12 Dirt receptacle
13 Main switch
14 Switch between hard surface/carpet
15 Floor nozzle
16 Suction tube
17 Main filter basket
18 Motor protection filter
19 Grid of the motor protection filter

Start up

 Check whether main filter basket has
been inserted into the appliance.
Operating modes
1 Operation with paper filter bag
2 Operation without filter bag
Installation of the filter bag
 Release and remove the suction head.
 Remove the main filter basket.
 Insert the paper filter bag.
 Insert main filter basket.
 Insert and lock the suction head.

Operation

Turning on the Appliance
 Plug in the mains plug.
 Switch on the appliance at the main
switch.
Cleaning operations
 Set the selection switch of the floor noz-
zle to hard surface or carpet.
 Perform the cleaning operation.
Turn off the appliance
 Switch off the appliance at the main
switch.
 Pull out the mains plug.
After each operation
 Empty the container.
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Care and maintenance

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
Clean main filter basket
 Main filter basket (washable), clean it
under running water if necessary.
ATTENTION
Risk of damage! Never insert the main filter
basket while wet.
– 2
EN

Transport

Storage

9