Initial Use Instructions; Adding Engine Oil - Build Worker BGD2001IS Manuel De L'utilisateur

ADDING ENGINE OIL

The generator is shipped WITHOUT OIL in the engine.
1. Place the generator on a level surface.
2. Loosen the cover screw and remove the maintenance cover.
3. With the generator in a level position, remove the oil filler cap/
dipstick.
4.Add enough SAE 10W-30 API service classification SJ or later (or
equivalent) oil to bring the oil level to the upper limit of the oil filler
n e c k . S A E 1 0 W - 3 0 o i l i s r e c o m m e n d e d f o r g e n e r a l u s e ; f o r
additional recommendations.
Do not overfill the engine with oil. If the engine is overfilled, the
excess oil may be transferred to the air cleaner housing and air filter.
5.Screw in the oil filler cap/dipstick securely.
6.Reinstall the maintenance cover.
DIPSTICK
OIL FILLERCAP

INITIAL USE INSTRUCTIONS

UPPER LIMIT
41