Engine Oil Change - Build Worker BGD2001IS Manuel De L'utilisateur

ENGINE OIL CHANGE

Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
1. Turn the engine switch to the OFF position to reduce the possibility
of fuel leakage.
2. Loosen the cover screw and remove the left side maintenance cover.
3. Place a suitable container next to the engine to catch the used oil.
4. Remove the oil filler cap/dipstick, and drain the oil into the container
by tipping the engine toward the oil filler neck.
5. With the engine in a level position, fill to the upper limit of the oil
filler neck with the recommended oil.
6. Reinstall the oil filler cap/dipstick securely.
7. Reinstall the left side maintenance cover and tighten the cover
screw securely.
OIL FILLER NECK
Wash your hands with soap and water after handling used oil.
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of it properly. Put it in
a sealed container, and take it to a recycling center. Do not discard it
in a rubbish bin, dump it on the ground, or pour it down a drain.
30
UPPER LIMIT