Dc Operation - Build Worker BGD2001IS Manuel De L'utilisateur

DC OPERATION

T h e D C s o c k e t s h o u l d O N L Y b e u s e d f o r c h a r g i n g 1 2 - vo l t
automotive type batteries. The DC charging output is not regulated.
When using the DC output, turn the Throttle switch to the OFF
position.
Connecting the battery charging cable (optional equipment):
1. Before connecting the battery charging cable to a battery that is
installed in a vehicle, disconnect the vehicle battery earth cable
from the negative (-) battery terminal.
The battery gives off explosive gases; keep sparks, flames and
cigarettes away. Provide adequate ventilation when charging or using
batteries.
WARNING: Battery posts, terminals and related accessories contain
lead and lead components. Wash hands after handling.
2. Plug the battery charging cable into the DC socket of the
generator.
3. Connect the red lead of the battery charging cable to the
positive (+ ) battery terminal and the black lead to the
negative (-) battery terminal.
4. Start the generator.
DC CIRCUIT PROTECTOR
DC RECEPTACLE
17