Before Operation - Build Worker BGD2001IS Manuel De L'utilisateur

1. Remove the fuel tank cap.
2.Fuel carefully to avoid spilling fuel.
Do not fill the fuel tank above the upper limit mark on the fuel strainer.
Fuel can damage paint and plastic. Be careful not to spill fuel when
filling your fuel tank. Damage caused by spilled fuel is not covered
under warranty.
3. After refueling, tighten the fuel tank
cap securely. For storage or
Transport, and ON to run the
generator.
ve the generator at least 10 feet (3
Mo
meters) away from the fueling source
and site before starting the engine.
After initial fueling (or anytime the generator is run completely out of
fuel), starting the engine may require additional pulls of the starter
grip. This generator utilizes a vacuum operated fuel pump and may
require additional pulls to draw fuel into the carburetor.

BEFORE OPERATION

Before using the generator, all generator operators must read the
following chapters and sections:
43