Table Des Matières; Technical Data; Eu Declaration Of Conformity - Desoutter ERP250 Mode D'emploi

Technical Data

Technical data
Voltage
3-230AC Veff.
Power consumption
4500 W
Torque range (Nm)
Min. torque (Nm) Max. torque (Nm)
ERP250 75
ERP500 150
ERP750 225
ERP1000 300
ERP1700 510
Torque range (ft.lb)
Min. torque (ft.lb) Max. torque (ft.lb)
ERP250 55
ERP500 110
ERP750 165
ERP1000 221
ERP1700 376
Rated speed (rpm)
ERP250
ERP500
ERP750
ERP1000
ERP1700
Weight
Model (kg)
ERP250 5.1
ERP500 5.8
ERP750 6.2
ERP1000 6.4
ERP1700 8.3
Declarations
Liability
Many events in the operating environment may affect the
tightening process and shall require a validation of results. In
compliance with applicable standards and/or regulations, we
hereby require you to check the installed torque and rota-
04/2022
250
500
750
1000
1700
184
368
553
737
1253
Rated speed (rpm)
822
347
245
205
85
(lb)
11.2
12.8
13.7
14.1
18.3
tional direction after any event that can influence the tighten-
ing result. Examples of such events include but are not lim-
ited to:
• initial installation of the tooling system
• change of part batch, bolt, screw batch, tool, software,
configuration or environment
• change of air- or electrical connections
• change in line ergonomics, process, quality procedures
or practices
• changing of operator
• any other change that influences the result of the tighten-
ing process
The check should:
• Ensure that the joint conditions have not changed due to
events of influence.
• Be done after initial installation, maintenance or repair
of the equipment.
• Occur at least once per shift or at another suitable fre-
quency.

EU DECLARATION OF CONFORMITY

We, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint
Herblain, France, declare under our sole responsibility that
the product (with name, type and serial number, see front
page) is in conformity with the following Directive(s):
2006/42/EC, 2014/30/EU, 2011/65/EU
Harmonized standards applied:
EN 62841-2-2:2015 + AC1:2015 EN 61000-3-2:2014 EN
61000-3-3:2013 EN 61000-6-2:2005 EN
61000-6-4:2007+A1:2011 EN 61326-2-3:2013 EN
62311:2008
Authorities can request relevant technical information from:
Pascal ROUSSY, R&D Manager, 38 rue Bobby Sands,
44818 Saint Herblain, France
Saint-Herblain, 2021/06/08
Pascal ROUSSY, R&D Manager
Signature of issuer
3 / 144
Safety Information