Troubleshooting - EWT CS 3 COMFORT Mode D'emploi

Symptom Possible Causes
1) No power supply.
Vacuum will
2) Malfunction of electric
not operate.
3) Container full of liquid.
Dust comes
1) The dust filter is missing
from motor
cover.
Reduced 1) Dust bag full
efficiency and
2) There is a blockage in the
motor/speed
vibration.
TROUBLE SHOOTING
cable, switch or motor.
or damaged.
nozzle, the hose, or the
container inlet, or the dust
filter is blocked by fine dust.
Corrective Action
1) Check power supply – cable,
breakers, fuses.
2) Have a specialist check and repair or
replace the defective component.
3) Empty container.
1) Attach or replace dust filter.
1) Replace dust bag
1) Check the nozzle, the hose, and the
container inlet for blockage. Take off
the dust filter, and wash and clean it.
Reuse it when it is dry. It is recom
mended to use a new dust filter.
42