Troubleshooting - EWT CS 2 Mode D'emploi

Symptom
Vacuum will not
operate.
Dust comes from
motor cover.
Reduced
efficiency and
motor/speed
vibration.

TROUBLESHOOTING

Possible Causes
1) No power supply.
2) Malfunction of electric cable,
switch or motor.
3) Container full of liquid.
1) The dust filter is missing or
damaged.
1) Dust bag full.
2) There is a blockage in the
nozzle, the hose, or the
container inlet, or the dust
filter is blocked by fine dust.
Corrective Action
1) Check power supply – cable,
breakers, fuses.
2) Have a specialist check and repair or
replace the defective component.
3) Empty container.
1) Attach or replace dust filter.
1) Replace dust bag.
1) Check the nozzle, the hose, and the
container inlet for blockage. Take off
the dust filter, and wash and clean it.
Reuse it when it is dry.
It is recommended to use a new dust
filter.
43