Starting Up - EWT CS 3 COMFORT Mode D'emploi

STARTING UP

Image A:
Position " " : Start
Position " ": Prise Confort: Power is controlled by the power tool.
Position " ": Stop
Image B: Integrated socket
Power tools such as: drills, saws or sanders up to max, 2000W can be plugged directly into the integrated
electrical socket (21) on the vacuum cleaner.
Connect the hosepipe (Ø35mm) to the dust extraction outlet on the power tool using the adaptor supplied
for the tool. (You will find other suitable adaptors in specialist and DIY stores).
Plug the power tool into the "Integrated Socket" on the vacuum cleaner. Plug the vacuum cleaner into the
mains.
WARNING: Only plug the vacuum cleaner into an earthed
socket with a 16 Amp capacity.
Start the power tool and run it briefly at high speed. After a short
lapse of time, the vacuum cleaner starts up and vacuums the
dust and shavings produced.
DELAYED SHUT DOWN
After the power tool is switched off, the vacuum cleaner continues to work for a certain time in order to
vacuum the dust and shavings remaining in the power tool and the hosepipe.
34