Description Of The Machine - breviglieri teknofold 450 Manuel D'utilisation Et D'entretien

▪
When the user has failed to comply with the instructions
in this manual. Damage deriving from negligence, care-
lessness, bad and improper use of the machine or incor-
rect manoeuvres by the operator are also excluded from
the warranty. Removal of the safety devices with which
the machine is equipped shall automatically void the
warranty and relieve the Manufacturer from all relative
liability. The warranty also becomes void if spurious spare
parts are used.
Even when covered by the warranty, the machine must be
returned Carriage Free.

1.3 DESCRIPTION OF THE MACHINE

The TEKNOFOLD 450 bears «CE» marking in compliance with
the European Union standards described in directive 2006/42/
EC and successive modifications, as stated in the declaration of
conformity with which each machine is equipped.
1. Rear roller (tines, cage, packer)
2. Work depth adjuster ram
3. Right harrow unit
4. Driveline support
5. Left harrow unit
6. Driveline shield
7. Side driveline
8. Hydraulic cylinder to open/close harrows
9. Connection point to lift the machine
10. Central bearing frame with three-point hitch
11. Upper 3-point hitch
12. Power take-off
13. Side strip
14. Blade rotors
15. Central share
16. Central transmission unit
17. Lower 3-point hitch
18. Identification plate
19. Side final drive
20. Pipes to connect to hydraulic circuit of tractor
Fig. 1
- 21 -
teknofold 450
18