Auto Off Setting - AgraTronix AG-MAC PLUS Mode D'emploi

Temperature &
Test Weight Units
AUTO OFF SETTINGS
Auto Off setting allows you to select the length of time you want your tester to
"automatically turn off" (auto off) after the last button press (no activity). The
default setting of 5 minutes should suffi ce, but if not then change it to meet your
needs. Example, if your Auto-off is set at "5 minutes" then if you turn your unit on,
and walk away, and thus don't touch a button for 5 minutes, then your tester will
automatically turn off to conserve battery life.
TO CHANGE YOUR AUTO OFF SETTING:
1. Turn on Unit (press ON/OFF button)
2. Use UP/DOWN buttons to scroll to "SETTINGS" then press ENTER
3. Use UP/DOWN buttons to scroll to "Auto off" (Figure 14)
4. Press "ENTER" to scroll through the choices (30 seconds, 1 minute, 5 min.,
10 min., or 20 min.) and once the desired option is displayed
5. Press Back arrow to save it (You are now back to the active grain display
where you are ready to test)
Auto off
Operation
Figure 13. Temperature and Test Weight Units
Figure 14. Auto Off
14
Unit
Length of
Time