Turn Backlight On Or Off; Temperature And Test Weight Units - AgraTronix AG-MAC PLUS Mode D'emploi

TURN BACKLIGHT ON OR OFF

To extend battery life turn your LCD display backlight "off" if you don't need it.
When outside in the daylight you will likely not need the backlight on.
TO TURN THE BACKLIGHT ON OR OFF:
1. Turn on Unit (press ON/OFF button)
2. Use UP/DOWN buttons to scroll to "SETTINGS" then press ENTER
3. Use UP/DOWN buttons to scroll to "Backlight"
4. Press "Enter" to toggle the backlight on or off
5. Press Back arrow when done
6. You are now back to the active grain display where you are ready to test
Backlight

TEMPERATURE AND TEST WEIGHT UNITS

When the temperature units are changed from Fahrenheit to Celsius the test
weight units are also changed.
• If you select Fahrenheit then you will get test weight in lb/bu (pounds per
bushel)
• If you select Celsius then you will get test weight in kg/hl (Kilograms per
Hectoliter)
TO CHANGE TEMPERATURE AND TEST WEIGHT UNITS:
1. Turn on Unit (press ON/OFF button)
2. Use UP/DOWN buttons to scroll to "SETTINGS" then press ENTER
3. Use UP/DOWN buttons to scroll to "Units" (Figure 13)
4. Press "ENTER" to toggle the between F (Fahrenheit) and C (Celsius)
5. Press Back arrow when done (You are now back to the active grain display
where you are ready to test)
Operation
Figure 12. Backlight
13
Backlight On