CHECK BATTERY POWER LEVEL AND REPLACE BATTERIES
The tester is supplied with four AA alkaline batteries.
A – Battery Door
B – Batteries
(4 AA alkaline batteries)
CHECK BATTERY LEVEL
1. Turn on Unit (press ON/OFF button)
2. Use UP/DOWN buttons to scroll to "SETTINGS" then press "ENTER"
3. Use UP/DOWN buttons to scroll to "Battery"
4. Press "ENTER" (Percent of battery life remaining is displayed)(Figure 17)
5. Press Back Arrow when done
6. Press Back Arrow one more time to return to active grain display where you
can take a test
Service
B
A
Figure 16. Battery Door and Batteries
Figure 17. Battery Percentage
17
NOTE: Remember to
remove batteries
when unit is not in
use after the season
to avoid corrosion.