Clarion NX500 Mode D'emploi Et Manuel D'installation page 45

Registering your cellular phone (Pairing)
You can register up to 4 cellular phones.
1. Turn on the power of the cellular phone you
wish to register.
2. Touch the [Device] key to display the
Device Select screen.
3. Touch the [Add] key to display the Add the
Cellular screen.
4. Touch your desired Cellular key to select the
key for the cellular phone to be registered.
• You cannot select the Cellular key of which
another cellular phone is already registered.
Select a blank Cellular key.
5. If entering the Pass Key code is prompted on
your cellular phone, enter the Pass Key code
set to this unit.
• You can change the Pass key setting of this
unit by the BT Info screen under the
Telephone Settings screen.
When the pairing operation completes, the
registered cellular phone is set as the current
telephone, and the display returns to the
Telephone screen.
Note:
• You cannot register the same cellular phone
which is already registered doubly. If you
wish to change the Cellular key registered,
once delete the corresponding cellular phone
from the current Cellular key, and then
register it again to your desired Cellular key.
• To delete the cellular phone registration
1. Touch the [Device] key.
2. Touch the desired Device key you wish to
delete. A confirmation screen is displayed.
3. Touch the [Delete] key to display the
Delete the Cellular screen.
Selecting the cellular phone
To change the current cellular phone to the
other device which is already registered,
perform the following operation.
1. Touch the [Device] key to display the
Device Select screen.
2. Touch the currently connected device, then
press the [Cut] key to disconnect the active
device.
3. Touch the desired Device key you wish to
use. Press the [Connect] key to select
it as your active device. The corresponding
cellular phone is set as the current telephone.
• If the power of the cellular phone is not
turned on, turn it on.
• The cellular phone may prompt to
acknowledge the Bluetooth connection or
to enter the Pass Key code of this unit.
Perform these operations according to the
message displayed.
4. Touch the [Back] key to return to the
previous screen.
Obtaining the Phone Book data
Sending the Phone Book data from the cellular
phone enables you to make a call using the
Phone Book function from this unit.
1. Perform the Object Push transfer operation
of the Phone Book data on the current
cellular phone.
For details of the operation, see the
operation manual of the cellular phone.
Note:
• Some cellular phones may not be able to
transfer the Phone Book data.
• Some cellular phones cannot transfer
the Phone Book data when the hands-free
mode is set or it is also registered in the
Bluetooth mode. In those cases, disable
these functions from the cellular phone
before performing the Object Push transfer.
• Some cellular phones may transfer Phone
Book data automatically.
45
NX500/NZ500