Aux In/Av In Operations; Camera In Operations - Clarion NX500 Mode D'emploi Et Manuel D'installation

AUX In / AV In Operations
External peripheral devices, including a game
console, camcorder, navigation unit, iPod/
iPhone, etc. can be connected to the AUX IN or
AV IN connector on the back of this unit using
the A/V media cables.
WARNING
For your safety, the driver should not
watch the VTR, etc. or operate the controls
while driving. Please note that watching
and operating the VTR, etc. while driving
are prohibited by law in some countries.
NOTE:
For your safety, the unit has a safety function,
which turns off the picture when car is moving,
so only the audio can be heard. The picture can
be only watched, when the car is stopped and
parking brake is applied.

Camera In Operations

Switching to Camera mode
Press [Camera] button on Main Menu
to select desired mode (when unit is reading).
The LCD will display the external video.
The screen will dispaly "No Video" menu, if
there is no video signal. Press [
button to return to the Main Menu.
Switching to AUX IN / AV IN mode
Press [AUX IN] or [AV IN] button on Main Menu
to select desired mode (when unit is reading).
The LCD will display the external video.
The screen will dispaly "No Video" menu, if
there is no video signal.
You cannot directly control external devices
connected to the AUX IN or AV IN input.
When the video signal is displayed, press right
top corner to return to the Main Menu.
] back
49
NX500/NZ500