Clarion NX500 Mode D'emploi Et Manuel D'installation page 44

• You can talk with other party by using
the internal microphone. When it is hard
to hear for the other party in accordance
with the communication condition or the
used telephone, use the optional microphone
(RCB-199), and set the Microphone
Select setting to "External". The sound will
be improved, but noises may still be heard
depending on the communication condition.
Selecting the BT Phone mode
1. Press the [ ] button to display the Menu
screen.
2. Touch the [Bluetooth] key to select the
Bluetooth mode.
3. Touch the [Telephone] key to select the BT
Phone mode.
The Telephone screen is displayed.
• When the connection with a Bluetooth
telephone has been established, the
icon and signal level indicator are displayed
at the top of the screen.
Telephone settings
Setting the telephone features
1. Touch the [Setting] key to display the
Telephone Settings screen.
2. Perform setting for the desired item.
See the following sections for detail.
3. Touch the [Back] key to return to the
previous screen.
• Setting Automatic Connection
The system automatically reconnects the
44
NX500/NZ500
cellular phone after the connection is lost or the
system is restarted.
• The factory default setting is "OFF".
Touch the [ON] or [OFF] key of the Automatic
Connection item to set the function ON or
OFF.
• Selecting Microphone
You can select the microphone to be used.
• The factory default setting is "Internal".
Touch the [External] or [Internal] key of the
Microphone Select item to set the function.
Note:
• When "Internal" is selected, and a call
comes in during the operation panel open,
the operation panel is automatically closed
because the microphone is on the operation
panel.
• When "Internal" is selected, the
[OPEN /CLOSE] button is disabled
during a call.
• Setting Microphone Gain
You can adjust the input level of the
microphone in 5 levels.
• The factory default setting is "3".
Note:
• The input level of the microphone can be
affected by its surroundings. Adjust the level
when the person on the other end of
the telephone has a reception problem.
1. Touch the level indicator button of the
Microphone Gain item to adjust the input
level.
• Confirming Bluetooth Information and
setting Pin Code
You can confirm the various information
concerning the Bluetooth Interface features.
1. Touch the [Settings] key of the BT Info item
to display the information on the screen.
2. When you finish confirming the Bluetooth
information, touch the [BT Menu] key to
return to the previous screen.
If you want to change the Pin Code setting
of this unit, perform the following steps.
3. Touch the text box of the Pin Code item to
display the Ten-Key Pad screen.
• The factory default setting is "1234".
4. Enter your desired 4-digit PIN number, then
touch the [OK] key.