Clarion NX500 Mode D'emploi Et Manuel D'installation page 48

HD Radio Operations
• Manual recall:
1. Press the [BAND] button to select the
desire band (FM or AM) on the tuner.
2. Press the preset station (1 to 15) on tuner
display. Press [ ] or [
next station up or down the preset list.
3. Touch the desired Band key to select the
band you wish to store.
4. Tune in the station you wish to store using
the seek tuning, manual tuning, or preset
tuning.
5. Touch and hold the desired Preset key you
wish to store the current station for more
than 2 seconds.
Manual memory
1. Touch the desired Band key to select the
band you wish to store.
2. Tune in the station you wish to store using
the seek tuning, manual tuning, or preset
tuning.
3. Touch and hold the desired Preset key you
wish to store the current station for more than
2 seconds.
Auto Store
The Auto Store is a function for storing up to 15
stations that are automatically tuned in
sequentially. If 15 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Touch the [Band] key to select the desired
band. (FM or AM)
2. Touch and hold the [AS/PS] key to start the
Auto Store function. A beep sounds and
the stations with good reception are stored
automatically to the preset channels.
Preset Scan
The Preset Scan receives the stations stored in
the preset memory in order. This function is
useful when searching for the desired station in
memory.
1. Touch the [Band] key to select the desired
band. (FM or AM)
2. Touch the [PS] key to start the Preset Scan.
The unit starts scanning each station for 10
seconds sequentially.
3. When the desired station is tuned in, touch
the [PS] key again to continue receiving that
station.
48
NX500/NZ500
HD Radio Subchannel Function
1. Touch the [HD] key to switch between
the available subchannels. Each time the
key is touched, the subchannel reception
] to select
changes in the following order: HD1, HD2,
HD3, HD4, HD1...
2. You can save your desired subchannel by
touching and holding the desired Preset key
you wish to store the current subchannel for
more than 2 seconds.
Note: Not all stations have HD Radio
iTunes Tagging Function
1. Touch the [TAG] key to store the current
music information to memory.
2. You may store up to 64 tags in the memory
when an iPod/iPhone is not connected.
3. When an iPod/iPhone is connected to
the unit, the unit will automatically transfer
the tags to the iPod/iPhone.
Note: Not all broadcasted material can be
tagged. The iTunes Tagging function is
only available for Apple iPod and iPhone
devices.
subchannel broadcasts.