Clarion NX500 Mode D'emploi Et Manuel D'installation page 20

Basic Operations
Adjusting the clock
Press the [Setup] button. The Setup menu will
be displayed. Touch "Clock" in General sub
menu.
2. Set up the time by touching the digital
numbers on the screen.
3. Touch the [Clock Mode] to change time
settings to 12Hr or 24Hr. Select 12Hr, than
you can choose AM or PM mode.
Adjusting the Radio region
1. Touch the [Radio Field] button in the Setup
menu.
2. A region selection menu will appear. Scroll
down using the arrow at the bottom of the
menu. Scroll up using the arrow at the
bottom of the menu. Select the area's radio
region that you are in. If the region selected is
incorrect, radio reception will be poor.
Displaying the Navigation Map
1. Touch the [Navi] button on the Main Menu
screen.
The warning screen will be displayed.
20
NX500/NZ500
2. Press the highlighted check mark (Accept).
The Main Menu will be displayed. Select your
destination.
3. Select one of the options dispalyed on the
screen.
• Go To...
• Point of Interest
• State or Province: CA (The software
remembers the last State/Province)
• History (The adresses you navigate before)
4. The navigation system will calculate a route
to the selected destination by using the
criteria set in Setup Mode.
5. Touch the State or Province button.
The "City" keyboard screen will be displayed.
Press the check button to choose the
city from the list, or spell the City name on
keyboard. Than press Enter button.