Electrical Connection - Pepperl+Fuchs Vibracon Mini LVL-A1 Mise En Service

Electrical connection

Requirements: Operating mode (MIN or MAX) is
defined (see page 19).
½
Comply with the safety instructions
(see page 23).
½
Comply with cable specifications for the
present connector (see page 23).
½
Read the nameplate to determine what variant
the LVL-A1 is:
variant DC-PNP, variant AC or AS-i-Bus.
½
Note the connection data.
Valve plugs are placed separately and
disassembled:
½
Assemble and install valve plugs (also
QUICKON) acc. to instructions on the plug
packaging.
Warning!
Danger to life from electrocution!
½
Disconnect LVL-A1 from power source.
Connect variant DC-PNP (direct current)
Voltage source: safety extra-low voltage Class 2
circuit (North America)
Connector M12 x 1
Operating mode
MAX (NC contact)
1
1
2
3
R
L-
Suitable for antivalence operation. In the event of
a fault, both electronic switches are open.
2
2
1 1: BN
2: WT
4
3: BU
0.5 A
L+
Operating mode
MIN (NO contact)
1 4
1 4
2
1
4
3
R
L-
1: BN
3: BU
4: BK
0.5 A
L+
25