Installation Examples; Application Instructions - Pepperl+Fuchs Vibracon Mini LVL-A1 Mise En Service

Installation examples

The Vibracon Mini LVL-A1 can be installed in any
position in a tank or pipe. The formation of foam
does not impair its function.
Example
detection
Example
Example
protection

Application instructions

The LVL-A1 is suitable for any liquid which drips
from the fork of the LVL-A1 so that the fork can
oscillate freely. The liquid may also contain solids
which are smaller than 5 mm.
The LVL-A1 even functions when a slight build-up
(deposit) has formed on the fork. However, fluids
which form large build-ups may prevent the fork
from oscillating freely.
When installed in confined spaces or when
viscous fluids are used, the fork may not be
released sufficiently. The sensor then incorrectly
detects the fork as being covered.
18
3
€
: Overspill protection or top level
ó
: Dry running protection for pumps
ì
: Lower level detection or dry running
1
2